The ultimate special needs stroller for two children who require transportation together
Introducing a twin version of the popular BINGO Evo Stroller! This is a special Twin Attachment which allows two BINGO Evo strollers to be connected together. This still allows the flexibility of using the strollers together with the Twin Attachment, or split into individual strollers where required! The attachment connects to interface plates with a securing plunger, and wheels are placed in a holding position to enable them to be clear of the stroller’s castors.
It is extremely easy to steer both strollers together, as shown in the video below. Direction locks on the wheels can be engaged on the front stroller to enable more positive steering for circumstances such as navigiating slopes. Due to the frame articulation, transits over curbs are simple should these need to be negotiated. Seat configuration is also flexible, as both seats can be swapped from rear-facing or forward-facing as suited to the users’ requirements.
The same Twin Attachment can also be used with the BINGO allowing a double BINGO to be configured!
BINGO Evo Spacer Fabric Head Support Pads
Provides stability around the child’s head, and is a great addition if the child has limited head control.
Size 0: 2880-4470-323
Size 1: 2880-4471-000
Size 2: 2880-4472-000
Required for Head Support Speakers to be used. The speakers slide into the pad like below…
BINGO Evo Head Support Speakers
Perfect addition to the BINGO Evo for the ultimate sensory experience! Lull your child to sleep with a quiet tune!
Requires Spacer Fabric Head Support Pads for use. For installation instructions, click here.
Product Code:
2880-8330-000
Occipital Head Support
The Occipital Head Support Pad is a popular alternative head support option for the Gravity Chair and selected strollers. It is an ideal solution for users with reduced head control and who require additional support to maintain optimum head position. It features a very thin support behind the neck to ensure the client’s neck isn’t pushed forward but follows the contours of the user’s head perfectly.
It comes with Velcro attachment straps and an intuitive interchangeable loop system on the rear of the head support that allows it to be installed with the straps in a horizontal or vertical configuration depending on the product it is being installed on.
It is available in either an easy-to-clean Spextex wipe-down fabric or spacer air mesh fabric with soft merino fabric on the inside contact surfaces. The merino fabric on the inside will provide added comfort and avoid agitation for the user.
Spacer/Merino Fabric: 2010-4110-099
Wipe-Down Cover: 2010-4110-209
Standard Lateral Head Support
The Standard Lateral Head Support Pad is a popular alternative head support option for the Gravity Chair and selected strollers. It is an ideal solution for users with reduced head control who require additional support and a greater degree of lateral guidance to maintain optimum head position, whilst still keeping their field of vision unobstructed. It features a very thin support behind the neck to ensure the client’s neck isn’t pushed forward but follows the contours of the user’s head perfectly.
It comes with Velcro attachment straps and an intuitive interchangeable loop system on the rear of the head support that allows it to be installed with the straps in a horizontal or vertical configuration depending on the product it is being installed on.
Available in two sizes, it comes with either an easy-to-clean Spextex wipe-down fabric or spacer air mesh fabric with soft merino fabric on the inside contact surfaces. The merino fabric on the inside will provide added comfort and avoid agitation for the user.
Paediatric Spacer/Merino Fabric: 2010-4210-099
Paediatric Wipe-Down Cover: 2010-4210-209
Adult Spacer/Merino Fabric: 2010-4211-099
Adult Wipe-Down Cover: 2010-4211-209
Extended Lateral Head Support
The Extended Lateral Head Support Pad is a popular alternative head support option for the Gravity Chair and selected strollers. It is an ideal solution for users with minimal head control who require additional support extending down over the shoulders and a greater degree of lateral guidance to maintain optimum head position back to midline. It features a very thin support behind the neck to ensure the client’s neck isn’t pushed forward but follows the contours of the user’s head perfectly.
It comes with Velcro attachment straps and an intuitive interchangeable loop system on the rear of the head support that allows it to be installed with the straps in a horizontal or vertical configuration depending on the product it is being installed on.
Available in two sizes, it comes with either an easy-to-clean Spextex wipe-down fabric or spacer air mesh fabric with soft merino fabric on the inside contact surfaces. The merino fabric on the inside will provide added comfort and avoid agitation for the user.
Paediatric Spacer/Merino Fabric: 2010-4310-099
Paediatric Wipe-Down Cover: 2010-4310-209
Adult Spacer/Merino Fabric: 2010-4311-099
Adult Wipe-Down Cover: 2010-4311-209
BINGO Evo Standard Lateral Supports
Pair of height and angle adjustable lateral supports.
Size 1, 2 and 3 are compatible with all Size 1, 2 and 3 BINGO seat units, and compatible with both Duro Stroller Sizes. Size 0 can only be used on BINGO Mini.
| Size | Size 0 | Size 1 | Size 2 | Size 3 |
|---|---|---|---|---|
| Code | 2880-3009-346 | 2880-3010-346 | 2880-3020-346 | 2880-3030-346 |
| Height | 9 cm | 8 cm | 10 cm | 12 cm |
| Length | 9 cm | 10 cm | 12 cm | 13 cm |
BINGO Evo Teardrop Lateral Supports
Pair of Teardrop Lateral Supports for the BINGO Evo with Spex Discovery patented Axial technology for precise positioning around the child’s body
| Size | Size 1 | Size 2 |
|---|---|---|
| Code | 2006-3110-099 | 2006-3120-099 |
| Height | 13.5cm | 15.5cm |
| Depth | 7.5cm | 10.5cm |
BINGO Evo Sacral Suppor
Foam piece (9cm high) with Velcro attachment to the seat unit behind the back support upholstery to provide increased support for the sacral area.
2880-2510-060
BINGO Evo Thigh Wedge
Velcro attached under upholstery.
Product Code:
2006-0505-000
Width: 225mm
Depth: 105mm
Height: 20mm tapering down to 10mm
BINGO Evo Trochanter Wedges
Option to contour standard flat cushion. Velcro attached under upholstery.
Product Code:
2006-0660-000
BINGO Evo Abductor Pommel
Swing down abductor pommel for increased abduction of the legs. All sizes are compatible with all BINGO seat units
| Size 1 | Size 2 | Size 3 | |
|---|---|---|---|
| Code | 2880-1651-323 | 2880-1652-323 | 2880-1653-323 |
| Length | 9 cm | 11 cm | 12.5 cm |
| Width | 6 cm | 8 cm | 9 cm |
| Height | 9 cm | 10 cm | 10 cm |
BINGO Evo Chest Shoulder Harness
For support around the child’s chest to stop slumping.
| Size | Size 1 | Size 2 | Size 3 |
|---|---|---|---|
| Code | 2880-6751-000 | 2880-6752-000 | 2880-6753-000 |
BINGO Evo 5-Point Harness
Standard 5-Point Harness with front pull adjusters and neck padding
Product Code:
2880-6511-346
Spex 5-Point Harness
Spex Style 5-Point Harness on tee pad for babies and very small children.
Must be correctly positioned and worn at all times during transportation in the BINGO Mini Stroller.
Product Code:
2006-6551-000
BINGO Evo Spex 4-Point Hip Belt
X-Small Spex style 4-Point padded hip belt with dual centre pull tensioning with side release buckle.
Product Code:
2006-6400-027
BINGO Evo Groin Strap
Groin Strap for the BINGO Evo Stroller.
To fit size 1: 2880-6361-000
To fit size 2 & 3: 2880-6362-000
BINGO Evo Ankle Footfasts
BINGO Evo Spex style Ankle Footfasts with inner strap circumference of 15-23cm. This helps secure the child’s feet to the footplate (For example, these will help prevent foot injury when a child experiences extensor spasms).
Requires technician to install at time of purchase of stroller only (retro fit is not offered).
To fit Size 0 & 1: 2880-6101-000
To fit Size 2: 2880-6102-000
BINGO Evo Spex Ankle Footfasts
BINGO Evo Spex style Ankle Footfasts with inner strap circumference of 15-23cm. This helps secure the child’s feet to the footplate (For example, these will help prevent foot injury when a child experiences extensor spasms).
Requires technician to install at time of purchase of stroller only (retro fit is not offered).
Product Code:
1401-6161-017
BINGO Evo Footplate Spacer Block
Foam Footplate Spacer Block (40mm thick) to reduce lower leg length.
To fit size 0 & 1: 2880-5321-000
To fit size 2 & 3: 2880-5322-000
BINGO Evo Tray Table
Grey Therapy Tray Table that is adjustable in height and angle. Cannot be used with Grab Rail
- To fit size 0 & 1: 2880-7111-000
- To fit size 2 & 3: 2880-7112-000
An optional Tray Infill can be purchased to reduce the trunk cut-out (2880-7180-000).
BINGO Therapy Tray Infill
Used with the Therapy Tray to reduce the trunk cut-out. Fits both tray sizes on the Bingo Evo, and is suited for the Bingo Spex Stroller.
Product Code:
2880-7180-000
BINGO Evo Grab Rail
Grab Rail with upholstery. Uses tray receivers for mounting, therefore cannot be used with the Therapy Tray.
- To fit size 0: 2880-7250-323
- To fit size 1: 2880-7251-000
- To fit size 2 & 3: 2880-7252-000
BINGO Evo IV Pole
An IV pole is available to allow for high dependency users. It fits all size Bingos and comes with a mounting bracket for attachment to the mobility base.
Product Code:
2880-8275-000
BINGO Evo Oxygen Bottle Holder
The Oxygen Bottle Holder with mounting bracket for attachment to mobility base, fits a 100-120mm diameter “C Type” bottle. It is mounted in the middle of the BINGO stroller frame for stability and has a quick release detachment. It fits all size Bingos.
Product Code:
2880-8251-000
BINGO Evo Ventilator Tray
A Ventilator Tray that attaches to both chassis of the stroller base to hold additional high dependency equipment.
To fit size 0 & 1 stroller frame: 2880-8058-000
To fit size 2 & 3 stroller frames: 2880-8059-000
BINGO Evo Canopy
Keep out of the weather! Includes mounts and rain cover.
Size 1: 2780-7501-346
Size 2: 2780-7502-346
BINGO Evo Pressure-Relief Foam Upgrades
Sunmate foam overlay within the seat or back support upholstery for added comfort (the grey foam in the image).
| Seat Foam Overlay | 2880-0391-000 |
|---|---|
| Back Support Foam Overlay | 2880-2392-000 |
Wrist Safety Tether Strap
The wrist safety tether strap is required to comply with AS/NZS 3696.19. This is compatible with our entire stroller range.
Product Code:
2005-6930-000
BINGO Evo Swivel Lock
To hold castors straight when brisk walking. Fits all size Bingos.
2880-8440-000
BINGO Evo Cobra High-Low Indoor Base
The seat unit of the BINGO Evo easily transfers out of the stroller base and into the Cobra indoor base for feeding and activity times. Lower down the floor for playing and activities, and raise up to a table for meal time! Tilt settings can still be adjusted in the same way as the stroller base.
Has a gas pressure spring and 45° tilt. Seat height from 27-61cm.
- Size 0: 2880-8740-000
- Size 1: 2880-8711-000
- Size 2 & 3: 2880-8721-000
Stroller Handle-Bar Accessory Bag
Practical stroller accessory bag that clips onto the handle-bars of your stroller.
Refer to the BINGO Evo seat specifications. Please note that both stroller bases must be the same size for the Twin Attachment to be used.
