Skip to content
  • There are no suggestions because the search field is empty.

Houdini 27 Harness

Enquire now
Child secured in a Houdini harness, showing in-flight support for safe, stable postural positioning during air travel

Houdini 27 Harness

Houdini 27 Harness

Designed for single or split backed double seats

This is a vehicle positioning harness for individuals with additional needs such as Autism Spectrum Disorder (ASD), Attention Deficit Hyperactivity Disorder (ADHD), Down Syndrome, Asperger’s disorder, developmental delay or other challenging behavioural needs where the person has problems with attention and safety. Providing safer travel and management of these loved ones when travelling in the car or other means of transport.

Medifab is pleased to provide the most comprehensive special purpose car seat we’ve every introduced for children and teenagers, providing various kinds of extension accessories and multi-adjustable features to allow longer use by the child and to suit the wide spectrum of children’s needs.

The Carrot 3000 Car Seat is one of the safest child seats in the world, catering for safety and the importance of keeping the child in a safe and supported posture for travel and was was designed, engineered and built to provide optimal positioning & safety for children with insufficient head, trunk, and pelvic stability.

Guidelines
  • Guidelines
  • Safety
  • Checklist

Alternatively, this harness can also be used to offer postural support and assist in seating the occupant in an upright sitting position for persons with physical disabilities such as Cerebral Palsy (CP) and other significant physical disabilities or complex needs where extra support and positioning is required during travel.

Fits most types of vehicle seating including low or high backed, and is used on aircraft seats by many leading airlines. The two transverse fixing straps do not interfere with the passenger behind using the drop down trays (depending on airline). It is recommended to seek permission from the airlines to use the Houdini 27 harness prior to departure.

The harness consists of a full body 5-point harness connected to a back pad which is fitted horizontally around the vehicle seat back with two horizontal fixing straps.

The Houdini 27 harness is identical to the Houdini 28 harness, except the mounting straps are different for different seats.

Please note, to comply with safety regulations, the vehicle safety belt must always be worn over the top of the harness. The combination of the existing vehicle safety belt and the secondary harness offers added security for the passenger.

It is advisable to carry out a safety and risk assessment to first consider the problems involved and what the situation would be if the passenger is not wearing a special needs harness. Could they be in danger to themselves and to other passengers in the vehicle or even other drivers on the road if they are not safely seated during travel?

A safety webbing slicer is included with every vehicle harness and must be kept in the vehicle as a safety precaution.

  • Only suitable for single backrest seats eg: front vehicle seat, split rear backrest seats, bus and airline seats

  • Attaching straps go horizontally around the rear of the seat it is installed on

  • Full 5-point harness for good support (crotch strap between the legs doesn’t need to be used if not required)

  • Access to rear of seat is necessary when installing

  • Cross strap can be purchased for additional security of the shoulder straps (prevents the shoulder straps been pulled off)

  • No gap required between seat and backrest

Media

Houdini-Vehicle-Harnesses-Introduction-Video-Image Play

Introduction to Houdini Vehicle Harnesses

How-to-Install-Houdini-27-Harness-Video-Image Play

How to install Houdini 27 Harness

Specifications

Sizing
  • Sizing
  • Washing Instructions
  • Warranty
Code Size Age Group Buckle Type
4604-2703-017 27B 7 years to adult Standard Centre-Release
4604-2703-026 27BSB 7 years to adult Anti-Escape
4604-2703-031 27B 7 years to adult Pen-Key Release

  • Hand wash only – in warm water up to 70/80 degrees.

  • Use mild detergent/anti-bacterial liquid wash.

  • Mild disinfectant can be used.

  • Do not use bleach

  • Do not tumble dry

12 months

FAQ

Does this harness require a vehicle tether point?

No. This harness does not require any tethering; it is not a safety harness. It is simply attached to the vehicle seat with the securing straps.

If I can’t pass the strap between the seat and the backrest, what can I do?

This can be common. Most vehicles have a carpet flap at the rear which prevents the straps coming vertically around the seat. In virtually all cases the carpet can be cut with a pair of scissors or a knife to provide access through.

How do I Care for my Harness when it needs washing?

  • Harnesses must be cleaned by Hand washing only, in warm water up to 70 or 80 degrees.
  • Use a mild detergent/anti-bacterial liquid wash.
  • Mild disinfectant can be used.
  • Do not use Bleach or Tumble Dry your harness.

Houdini 27 Harness Resources

Houdini Harness Flyer

0.43 MB

Comparison Chart (AU) Harnesses

0.48 MB

Comparison-Chart (NZ) Harnesses

0.48 MB

Houdini Harness 27 User Manual

3.16 MB

Accessories

Buckle-Anti-Escape

Houdini Harness Anti-Escape Buckle

A green Hoggi Cruiser anterior walker offering dynamic support for active children, shown side on facing the left

Houdini Harness Cross Strap

Zoomed up image of pen popper buckle with pen.

Houdini Harness Pen-Release Buckle

Buckle-Anti-Escape

Houdini Harness Anti-Escape Buckle

Steel anti-escape buckles can be installed to prevent children with inquisitive fingers, challenging behaviour or learning difficulties escaping from the carseat or harness during travel. These unique buckles have proven very successful as they operate in reverse to a normal buckle.

To disengage, you raise the spring-loaded catch, and then tension the belt before it will release. (It will not press release)

Cross-Strap

Houdini Harness Cross Strap

A Cross strap can be fitted to this harness to hold the shoulder straps together and prevent them from slipping off.

! WARNING: May Present Hazard

The Harness Cross Strap should only be used if required to prevent shoulder straps falling down, or as a restraint mechanism when a user is escaping from their harness.

Potential risk of injury increases due to the device’s proximity to the neck area.

Please ensure that the cross strap is located far enough down to be safe for the user.

Cross Straps must not be used on Harnesses with Chest Pads as the Cross Strap would be too near to the neck.

Side-Release Buckle 4604-3112-019
Anti-Escape Buckle 4604-3004-026
Pen/Key Release Buckle 4604-3004-025

Part Number: 
Side-Release: 4604-3112-019
Anti-Escape: 4604-3004-026
Pen/Key Release: 4604-3004-025

Buckle-Pen-Key-Release-

Houdini Harness Pen-Release Buckle

Pen/Key release buckle upgrade to harness, including a safety webbing slicer tool and retractable pen device for buckle release.

Houdini vehicle harness safety kit includes:

  • Lifesaver seat belt slicer/cutter
  • 2x window stickers

Product code: 4604-0010-017

Vehicle-Harness-Cutter-300x300

Related products

Experience a live product demonstration

Get in touch today