BINGO Evo Stroller

Perfect addition to the BINGO Evo for the ultimate sensory experience! Lull your child to sleep with a quiet tune!

Requires Spacer Fabric Head Support Pads for use. For installation instructions, click here.

Product Code:

2880-8330-000

The Occipital Head Support Pad is a popular alternative head support option for the Gravity Chair and selected strollers. It is an ideal solution for users with reduced head control and who require additional support to maintain optimum head position. It features a very thin support behind the neck to ensure the client’s neck isn’t pushed forward but follows the contours of the user’s head perfectly.

It comes with Velcro attachment straps and an intuitive interchangeable loop system on the rear of the head support that allows it to be installed with the straps in a horizontal or vertical configuration depending on the product it is being installed on.

It is available in either an easy-to-clean Spextex wipe-down fabric or spacer air mesh fabric with soft merino fabric on the inside contact surfaces. The merino fabric on the inside will provide added comfort and avoid agitation for the user.

Spacer/Merino Fabric: 2010-4110-099

Wipe-Down Cover: 2010-4110-209

Provides stability around the child’s head, and is a great addition if the child has limited head control.

Adaptable on Bingo Evo and Bingo Evo Mini, as well as the Duro Stroller.

Size 0: 2880-4470-323

Size 1: 2880-4471-346

Size 2: 2880-4472-346

Required for Head Support Speakers to be used. The speakers slide into the pad like below…

The Standard Lateral Head Support Pad is a popular alternative head support option for the Gravity Chair and selected strollers. It is an ideal solution for users with reduced head control who require additional support and a greater degree of lateral guidance to maintain optimum head position, whilst still keeping their field of vision unobstructed. It features a very thin support behind the neck to ensure the client’s neck isn’t pushed forward but follows the contours of the user’s head perfectly.

It comes with Velcro attachment straps and an intuitive interchangeable loop system on the rear of the head support that allows it to be installed with the straps in a horizontal or vertical configuration depending on the product it is being installed on.

Available in two sizes, it comes with either an easy-to-clean Spextex wipe-down fabric or spacer air mesh fabric with soft merino fabric on the inside contact surfaces. The merino fabric on the inside will provide added comfort and avoid agitation for the user.

Paediatric Spacer/Merino Fabric: 2010-4210-099

Paediatric Wipe-Down Cover: 2010-4210-209

Adult Spacer/Merino Fabric: 2010-4211-099

Adult Wipe-Down Cover: 2010-4211-209

Pair of height and angle adjustable lateral supports.

Size 1, 2 and 3 are compatible with all Size 1, 2 and 3 BINGO seat units, and compatible with both Duro Stroller Sizes. Size 0 can only be used on BINGO Mini.

Size 0 is compatible for the Bingo Evo and the Bingo Evo mini at 85mm high x 115mm deep.

Product Code:

2880-3008-100

These broad lateral supports are used on the Bingo Evolution Stroller in size one, as well as the Duro Stroller.

10.5cm(H) x 13cm(L)

Product Code:

2880-3008-310

Foam piece (9cm high) with Velcro attachment to the seat unit behind the back support upholstery to provide increased support for the sacral area.

Product Code:

2880-2510-060

Option to contour standard flat cushion. Velcro attached under upholstery.

Product Code:

2006-0660-000

Swing down abductor pommel for increased abduction of the legs. All sizes are compatible with all BINGO seat units

Velcro attached under upholstery.

Product Code:

2006-0505-000

Width: 225mm

Depth: 105mm

Height: 20mm tapering down to 10mm

Spex style 2-Point slim line hip belt for the BINGO Evo Stroller with dual pull tensioning and neoprene sleeve padding.

Product Code:

2006-6251-027

Groin Strap for the BINGO Evo Stroller.

To fit size 1: 2880-6361-000

To fit size 2 & 3: 2880-6362-000

Standard 5-Point Harness with front pull adjusters and neck padding

Product Code:

2880-6511-346

Spex Style 5-Point Harness on tee pad for babies and very small children.

Must be correctly positioned and worn at all times during transportation in the BINGO Mini Stroller.

Product Code:

2006-6551-000

Use a Spex Centrepoint harness to provide your child with the correct upper body support. The Centrepoint comes in two sizes…

Stabilizes and controls the pelvis. Can be quickly removed for washing.

Product Code:

1406-5420-027

Foam Footplate Spacer Block (40mm thick) to reduce lower leg length.

To fit size 0 & 1: 2880-5321-000

To fit size 2 & 3: 2880-5322-000

BINGO Evo Spex style Ankle Footfasts with inner strap circumference of 15-23cm. This helps secure the child’s feet to the footplate (For example, these will help prevent foot injury when a child experiences extensor spasms).

Requires technician to install at time of purchase of stroller only (retro fit is not offered).

To fit Size 0 & 1: 2880-6101-000

To fit Size 2: 2880-6102-000

Used with the Therapy Tray to reduce the trunk cut-out. Fits both tray sizes on the Bingo Evo, and is suited for the Bingo Spex Stroller.

Product Code:

2880-7180-000

Grab Rail with upholstery. Uses tray receivers for mounting, therefore cannot be used with the Therapy Tray.

• To fit size 0: 2880-7250-323
• To fit size 1: 2880-7251-000
• To fit size 2 & 3: 2880-7252-000

Grey Therapy Tray Table that is adjustable in height and angle. Cannot be used with Grab Rail

• To fit size 0 & 1: 2880-7111-000
• To fit size 2 & 3: 2880-7112-000

An optional Tray Infill can be purchased to reduce the trunk cut-out (2880-7180-000).

An IV pole is available to allow for high dependency users. It fits all size Bingos and comes with a mounting bracket for attachment to the mobility base.

Product Code:

2880-8275-000

The Oxygen Bottle Holder with mounting bracket for attachment to mobility base, fits a 100-120mm diameter “C Type” bottle. It is mounted in the middle of the BINGO stroller frame for stability and has a quick release detachment. It fits all size Bingos.

Product Code:

2880-8251-000

Keep out of the weather! Includes mounts and rain cover.

Size 1: 2780-7501-346

Size 2: 2780-7502-346

The wrist safety tether strap is required to comply with AS/NZS 3696.19. This is compatible with our entire stroller range.

Product Code:

2005-6930-000

To hold castors straight when brisk walking. Fits all size Bingos.

Product Code:

2880-8440-000

The seat unit of the BINGO Evo easily transfers out of the stroller base and into the Cobra indoor base for feeding and activity times. Lower down the floor for playing and activities, and raise up to a table for meal time! Tilt settings can still be adjusted in the same way as the stroller base.

Has a gas pressure spring and 45° tilt. Seat height from 27-61cm.

• Size 0: 2880-8740-000
• Size 1: 2880-8711-000
• Size 2 & 3: 2880-8721-000